dmesg - 2013-07-20 13:32

Return To 2013-07-20 13:32 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-26-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #38-Ubuntu SMP Mon Jun 17 21:43:33 UTC 2013 (Ubuntu 3.8.0-26.38-generic 3.8.13.2)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000008db36fff] usable
BIOS-e820: [mem 0x000000008db37000-0x000000008db66fff] reserved
BIOS-e820: [mem 0x000000008db67000-0x000000008de25fff] usable
BIOS-e820: [mem 0x000000008de26000-0x000000008dec3fff] ACPI NVS
BIOS-e820: [mem 0x000000008dec4000-0x000000008ea29fff] reserved
BIOS-e820: [mem 0x000000008ea2a000-0x000000008ea2afff] usable
BIOS-e820: [mem 0x000000008ea2b000-0x000000008ec30fff] ACPI NVS
BIOS-e820: [mem 0x000000008ec31000-0x000000008f071fff] usable
BIOS-e820: [mem 0x000000008f072000-0x000000008f7f2fff] reserved
BIOS-e820: [mem 0x000000008f7f3000-0x000000008f7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0x8deb2000  ACPI 2.0=0x8deb2000  SMBIOS=0xf04c0  MPS=0xfd480 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x0000000000040000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002444000) (20MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000002444000-0x0000000036120000) (828MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000036120000-0x0000000037088000) (15MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000037088000-0x000000005da78000) (617MB)
efi: mem09: type=2, attr=0xf, range=[0x000000005da78000-0x000000007e07b000) (518MB)
efi: mem10: type=7, attr=0xf, range=[0x000000007e07b000-0x000000007e081000) (0MB)
efi: mem11: type=1, attr=0xf, range=[0x000000007e081000-0x000000007e09f000) (0MB)
efi: mem12: type=7, attr=0xf, range=[0x000000007e09f000-0x0000000080c26000) (43MB)
efi: mem13: type=4, attr=0xf, range=[0x0000000080c26000-0x0000000080e67000) (2MB)
efi: mem14: type=7, attr=0xf, range=[0x0000000080e67000-0x0000000081168000) (3MB)
efi: mem15: type=4, attr=0xf, range=[0x0000000081168000-0x0000000081173000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x0000000081173000-0x00000000811a4000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000811a4000-0x00000000811a5000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000811a5000-0x00000000811ef000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000811ef000-0x00000000811fa000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000811fa000-0x0000000081211000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x0000000081211000-0x0000000081212000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x0000000081212000-0x000000008122c000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x000000008122c000-0x000000008122d000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x000000008122d000-0x0000000081278000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x0000000081278000-0x0000000081283000) (0MB)
efi: mem26: type=7, attr=0xf, range=[0x0000000081283000-0x00000000812b3000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000812b3000-0x00000000812b5000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000812b5000-0x00000000812cd000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000812cd000-0x000000008130b000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x000000008130b000-0x0000000081324000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x0000000081324000-0x0000000081325000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x0000000081325000-0x000000008133c000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x000000008133c000-0x000000008133d000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x000000008133d000-0x000000008134f000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x000000008134f000-0x0000000081350000) (0MB)
efi: mem36: type=7, attr=0xf, range=[0x0000000081350000-0x0000000081358000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x0000000081358000-0x0000000081396000) (0MB)
efi: mem38: type=7, attr=0xf, range=[0x0000000081396000-0x00000000813ad000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x00000000813ad000-0x00000000813ae000) (0MB)
efi: mem40: type=7, attr=0xf, range=[0x00000000813ae000-0x00000000813c8000) (0MB)
efi: mem41: type=4, attr=0xf, range=[0x00000000813c8000-0x00000000813c9000) (0MB)
efi: mem42: type=7, attr=0xf, range=[0x00000000813c9000-0x00000000813ea000) (0MB)
efi: mem43: type=4, attr=0xf, range=[0x00000000813ea000-0x00000000813eb000) (0MB)
efi: mem44: type=7, attr=0xf, range=[0x00000000813eb000-0x000000008141d000) (0MB)
efi: mem45: type=4, attr=0xf, range=[0x000000008141d000-0x0000000081428000) (0MB)
efi: mem46: type=7, attr=0xf, range=[0x0000000081428000-0x0000000081459000) (0MB)
efi: mem47: type=4, attr=0xf, range=[0x0000000081459000-0x000000008145b000) (0MB)
efi: mem48: type=7, attr=0xf, range=[0x000000008145b000-0x0000000081469000) (0MB)
efi: mem49: type=4, attr=0xf, range=[0x0000000081469000-0x000000008148b000) (0MB)
efi: mem50: type=7, attr=0xf, range=[0x000000008148b000-0x000000008148f000) (0MB)
efi: mem51: type=4, attr=0xf, range=[0x000000008148f000-0x00000000814e6000) (0MB)
efi: mem52: type=7, attr=0xf, range=[0x00000000814e6000-0x00000000814e8000) (0MB)
efi: mem53: type=4, attr=0xf, range=[0x00000000814e8000-0x0000000081519000) (0MB)
efi: mem54: type=7, attr=0xf, range=[0x0000000081519000-0x0000000081536000) (0MB)
efi: mem55: type=4, attr=0xf, range=[0x0000000081536000-0x00000000815a1000) (0MB)
efi: mem56: type=7, attr=0xf, range=[0x00000000815a1000-0x00000000815be000) (0MB)
efi: mem57: type=4, attr=0xf, range=[0x00000000815be000-0x0000000081754000) (1MB)
efi: mem58: type=7, attr=0xf, range=[0x0000000081754000-0x000000008176b000) (0MB)
efi: mem59: type=4, attr=0xf, range=[0x000000008176b000-0x0000000081781000) (0MB)
efi: mem60: type=7, attr=0xf, range=[0x0000000081781000-0x0000000081787000) (0MB)
efi: mem61: type=4, attr=0xf, range=[0x0000000081787000-0x000000008cee8000) (183MB)
efi: mem62: type=7, attr=0xf, range=[0x000000008cee8000-0x000000008d48c000) (5MB)
efi: mem63: type=3, attr=0xf, range=[0x000000008d48c000-0x000000008db37000) (6MB)
efi: mem64: type=0, attr=0xf, range=[0x000000008db37000-0x000000008db53000) (0MB)
efi: mem65: type=0, attr=0xf, range=[0x000000008db53000-0x000000008db67000) (0MB)
efi: mem66: type=7, attr=0xf, range=[0x000000008db67000-0x000000008de1a000) (2MB)
efi: mem67: type=2, attr=0xf, range=[0x000000008de1a000-0x000000008de26000) (0MB)
efi: mem68: type=10, attr=0xf, range=[0x000000008de26000-0x000000008dec4000) (0MB)
efi: mem69: type=6, attr=0x800000000000000f, range=[0x000000008dec4000-0x000000008e87d000) (9MB)
efi: mem70: type=6, attr=0x800000000000000f, range=[0x000000008e87d000-0x000000008e924000) (0MB)
efi: mem71: type=6, attr=0x800000000000000f, range=[0x000000008e924000-0x000000008e926000) (0MB)
efi: mem72: type=6, attr=0x800000000000000f, range=[0x000000008e926000-0x000000008e935000) (0MB)
efi: mem73: type=6, attr=0x800000000000000f, range=[0x000000008e935000-0x000000008e937000) (0MB)
efi: mem74: type=6, attr=0x800000000000000f, range=[0x000000008e937000-0x000000008e9f1000) (0MB)
efi: mem75: type=5, attr=0x800000000000000f, range=[0x000000008e9f1000-0x000000008e9fc000) (0MB)
efi: mem76: type=5, attr=0x800000000000000f, range=[0x000000008e9fc000-0x000000008ea2a000) (0MB)
efi: mem77: type=4, attr=0xf, range=[0x000000008ea2a000-0x000000008ea2b000) (0MB)
efi: mem78: type=10, attr=0xf, range=[0x000000008ea2b000-0x000000008ec31000) (2MB)
efi: mem79: type=4, attr=0xf, range=[0x000000008ec31000-0x000000008ed86000) (1MB)
efi: mem80: type=3, attr=0xf, range=[0x000000008ed86000-0x000000008f030000) (2MB)
efi: mem81: type=4, attr=0xf, range=[0x000000008f030000-0x000000008f04c000) (0MB)
efi: mem82: type=3, attr=0xf, range=[0x000000008f04c000-0x000000008f066000) (0MB)
efi: mem83: type=4, attr=0xf, range=[0x000000008f066000-0x000000008f067000) (0MB)
efi: mem84: type=3, attr=0xf, range=[0x000000008f067000-0x000000008f069000) (0MB)
efi: mem85: type=4, attr=0xf, range=[0x000000008f069000-0x000000008f072000) (0MB)
efi: mem86: type=6, attr=0x800000000000000f, range=[0x000000008f072000-0x000000008f7f3000) (7MB)
efi: mem87: type=4, attr=0xf, range=[0x000000008f7f3000-0x000000008f800000) (0MB)
efi: mem88: type=7, attr=0xf, range=[0x0000000100001000-0x000000023f000000) (5103MB)
efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem91: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem92: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
efi: mem93: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
efi: mem94: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
efi: mem95: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: MSI MS-7792/FM2-A75IA-E53 (MS-7792), BIOS V2.0 04/24/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFF0000000 write-back
  2 base 00008F800000 mask FFFFFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2296MB, range: 8MB, type UC
total RAM covered: 2296M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2296MB, range: 8MB, type UC
e820: update [mem 0x8f800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x8f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ffff8800000fd7c0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x8f7fffff]
 [mem 0x00000000-0x7fffffff] page 1G
 [mem 0x80000000-0x8f7fffff] page 2M
kernel direct mapping tables up to 0x8f7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x23effffff]
 [mem 0x100001000-0x1001fffff] page 4k
 [mem 0x100200000-0x13fffffff] page 2M
 [mem 0x140000000-0x1ffffffff] page 1G
 [mem 0x200000000-0x23effffff] page 2M
kernel direct mapping tables up to 0x23effffff @ [mem 0x8de22000-0x8de25fff]
RAMDISK: [mem 0x36120000-0x37087fff]
ACPI: RSDP 000000008deb2000 00024 (v02 ALASKA)
ACPI: XSDT 000000008deb2078 00074 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 000000008deb7e00 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
ACPI: DSDT 000000008deb2188 05C76 (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 000000008deb9080 00040
ACPI: APIC 000000008deb7f10 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 000000008deb7f88 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 000000008deb7fd0 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
ACPI: HPET 000000008deb8010 00038 (v01 ALASKA    A M I 01072009 AMI  00000005)
ACPI: IVRS 000000008deb8048 00070 (v02    AMD ANNAPURN 00000001 AMD  00000000)
ACPI: SSDT 000000008deb80b8 006B2 (v01    AMD ANNAPURN 00000001 AMD  00000001)
ACPI: SSDT 000000008deb8770 004B7 (v02    AMD ANNAPURN 00000001 MSFT 04000000)
ACPI: CRAT 000000008deb8c28 001A8 (v01    AMD ANNAPURN 00000001 AMD  00000001)
ACPI: BGRT 000000008deb8dd0 00038 (v00 ALASKA    A M I 01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
  NODE_DATA [mem 0x23effb000-0x23effffff]
 [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237200000-ffff88023e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009ffff]
  node   0: [mem 0x00100000-0x8db36fff]
  node   0: [mem 0x8db67000-0x8de25fff]
  node   0: [mem 0x8ea2a000-0x8ea2afff]
  node   0: [mem 0x8ec31000-0x8f071fff]
  node   0: [mem 0x8f7f3000-0x8f7fffff]
  node   0: [mem 0x100001000-0x23effffff]
On node 0 totalpages: 1888724
  DMA zone: 64 pages used for memmap
  DMA zone: 12 pages reserved
  DMA zone: 3908 pages, LIFO batch:0
  DMA32 zone: 9034 pages used for memmap
  DMA32 zone: 569083 pages, LIFO batch:31
  Normal zone: 20416 pages used for memmap
  Normal zone: 1286207 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000008db37000 - 000000008db67000
PM: Registered nosave memory: 000000008de26000 - 000000008dec4000
PM: Registered nosave memory: 000000008dec4000 - 000000008ea2a000
PM: Registered nosave memory: 000000008ea2b000 - 000000008ec31000
PM: Registered nosave memory: 000000008f072000 - 000000008f7f3000
PM: Registered nosave memory: 000000008f800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0x8f800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s85056 r8192 d21440 u524288
pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1859198
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 78000000
PM: Registered nosave memory: 0000000078000000 - 000000007c000000
Memory: 7067572k/9420800k available (7010k kernel code, 1865904k absent, 487324k reserved, 6232k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
NR_IRQS:16640 nr_irqs:712 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 30408704 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3393.605 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.21 BogoMIPS (lpj=13574420)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 008f800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26697 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A4-5300 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
Performance Events: 
perf: AMD core performance counters detected
AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (13574.42 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x8de26000-0x8dec3fff] (647168 bytes)
PM: Registering ACPI NVS region [mem 0x8ea2b000-0x8ec30fff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:9993] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xfeb4f000-0xfeb4f7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfeb4a000-0xfeb4afff]
pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeadffff]
pci 0000:01:00.0: reg 14: [mem 0xfea00000-0xfea7ffff]
pci 0000:01:00.0: reg 18: [io  0xe000-0xe01f]
pci 0000:01:00.0: reg 1c: [mem 0xfeae0000-0xfeae3fff]
pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeabffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x8db37000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8de26000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8ea2b000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f072000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x90000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x0600-0x060f] has been reserved
system 00:03: [io  0x0a10-0x0a1f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: [io  0x04d0-0x04d1] has been reserved
system 00:0b: [io  0x040b] has been reserved
system 00:0b: [io  0x04d6] has been reserved
system 00:0b: [io  0x0c00-0x0c01] has been reserved
system 00:0b: [io  0x0c14] has been reserved
system 00:0b: [io  0x0c50-0x0c51] has been reserved
system 00:0b: [io  0x0c52] has been reserved
system 00:0b: [io  0x0c6c] has been reserved
system 00:0b: [io  0x0c6f] has been reserved
system 00:0b: [io  0x0cd0-0x0cd1] has been reserved
system 00:0b: [io  0x0cd2-0x0cd3] has been reserved
system 00:0b: [io  0x0cd4-0x0cd5] has been reserved
system 00:0b: [io  0x0cd6-0x0cd7] has been reserved
system 00:0b: [io  0x0cd8-0x0cdf] has been reserved
system 00:0b: [io  0x0800-0x089f] has been reserved
system 00:0b: [io  0x0b20-0x0b3f] has been reserved
system 00:0b: [io  0x0900-0x090f] has been reserved
system 00:0b: [io  0x0910-0x091f] has been reserved
system 00:0b: [io  0xfe00-0xfefe] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0b: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (disabled)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x03af]
pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:03: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:03: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15776k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi:  Extended features:  PreF PPR GT IA
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7cc26000-0x80c26000] (64MB) mapped at [ffff88007cc26000-ffff880080c25fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1374316302.728:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 14234
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011f80000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb49000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 28bf685926cf24167b29d0d66d07256be256431c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:07: setting system clock to 2013-07-20 10:31:44 UTC (1374316304)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1172k freed
Freeing unused kernel memory: 1080k freed
udevd[98]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 41 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:01:00.0: Disabling ASPM L0s L1
e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000074000, d4:3d:7e:b5:ae:ff, XID 0c900800 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f180 irq 41
ata3: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f200 irq 41
ata4: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f280 irq 41
ata5: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f300 irq 41
ata6: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f380 irq 41
e1000e 0000:01:00.0: irq 43 for MSI/MSI-X
e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
usb 1-4: new high-speed USB device number 3 using ehci-pci
e1000e 0000:01:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:19:9e:64
e1000e 0000:01:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:01:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-008
usb 1-4: New USB device found, idVendor=0cf3, idProduct=9271
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: UB91
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3393.658 MHz
Switching to clocksource tsc
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 4-3: new full-speed USB device number 2 using ohci_hcd
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-3: New USB device found, idVendor=0cf3, idProduct=3000
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-2: new full-speed USB device number 2 using ohci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: USB Receiver
usb 7-2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2
input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.2/0003:046D:C52B.0003/input/input2
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:16.0-2:1
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 3906556k swap on /dev/sda3.  Priority:-1 extents:1 across:3906556k 
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[404]: starting version 175
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
cfg80211: Calling CRDA to update world regulatory domain
wmi: Mapper loaded
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (ARUBA 0x1002:0x9993 0x1462:0x7792).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000030000000 - 0x000000004FFFFFFF
[drm] Detected VRAM RAM=768M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 3645750 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 768M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 46 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading ARUBA Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff880232860c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff880232860c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff880232860c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff880232860c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff880232860c10
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   VGA-1
[drm]   HPD2
[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_UNIPHY2
[drm]     CRT1: NUTMEG
[drm] Connector 2:
[drm]   DP-1
[drm]   HPD3
[drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xC114C000
[drm] vram apper at 0xC0000000
[drm] size 7299072
[drm] fb depth is 24
[drm]    pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
usb 4-3: USB disconnect, device number 2
usbcore: registered new interface driver ath3k
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Console: switching to colour frame buffer device 210x65
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
hda-intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 47 for MSI/MSI-X
type=1400 audit(1374316310.409:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=609 comm="apparmor_parser"
type=1400 audit(1374316310.409:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=633 comm="apparmor_parser"
type=1400 audit(1374316310.413:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=609 comm="apparmor_parser"
type=1400 audit(1374316310.413:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=633 comm="apparmor_parser"
type=1400 audit(1374316310.413:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=609 comm="apparmor_parser"
type=1400 audit(1374316310.413:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=633 comm="apparmor_parser"
type=1400 audit(1374316310.413:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=630 comm="apparmor_parser"
type=1400 audit(1374316310.413:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser"
type=1400 audit(1374316310.413:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser"
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Atheros AR9271 Rev:1
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 4-3: new full-speed USB device number 3 using ohci_hcd
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
usb 4-3: New USB device found, idVendor=0cf3, idProduct=3005
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
wlan0: authenticate with 1c:7e:e5:35:1a:98
wlan0: send auth to 1c:7e:e5:35:1a:98 (try 1/3)
wlan0: authenticated
wlan0: associate with 1c:7e:e5:35:1a:98 (try 1/3)
wlan0: RX AssocResp from 1c:7e:e5:35:1a:98 (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: failsafe main process (772) killed by TERM signal
type=1400 audit(1374316317.333:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1077 comm="apparmor_parser"
type=1400 audit(1374316317.333:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1077 comm="apparmor_parser"
type=1400 audit(1374316317.333:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1077 comm="apparmor_parser"
type=1400 audit(1374316317.377:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1079 comm="apparmor_parser"
init: tty1 main process ended, respawning

Return To 2013-07-20 13:32 System Information